User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
xv
Firmware and Software Compatibility
The GV-AS / GV-EV Controllers firmware versions compatible with GV-ASManager V4.0 -
V4.4 are listed below.
GV-ASManager
Models V4.0 V4.1 V4.2 V4.2.1 V4.2.2 V4.2.3 V4.3 V4.4
GV-AS100
V1.06 V1.08
GV-AS110 / 120
V1.06 V1.07
GV-AS200
V2.02
GV-AS200 Ethernet
Module
V2.01
GV-AS400
V1.04 V1.06
GV-AS1010 / 1110
N/A V1.0 V1.1 V1.2
GV-AS410
V1.1 V1.2 V1.22 V1.23 V1.3 V1.4
GV-AS210 / 810
V1.1 or earlier V1.2 V1.22 V1.23 V1.3 V1.4
GV-AS2110 / 4110 / 8110
N/A V1.23 V1.3 V1.4
GV-AS2120
N/A V1.35 V1.4
GV-EV48
N/A V1.0 V1.1 V1.11 V1.12 V1.3 V1.4
GV-ASBox / GV-ASNet
(Optional devices)
V1.06 V1.07