User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
Optional Devices
169
9
9.1 Optional GV-ASBox
The optional GV-ASBox is the I/O and network expansion module for GV-AS100, GV-AS110
and GV-AS120. With the GV-ASBox, additional network connectivity, 8 inputs, 8 outputs and
1 Wiegand reader can be added to GV-AS100, GV-AS110 or GV-AS120.
9.1.1 Main Features
• Add TCP/IP networking capability to GV-AS100 / 110 / 120
• Extend GV-AS100 / 110 / 120 from 1-door to 2-door controller
• Support 1 Wiegand reader of 26 to 64 bits
• Support 8 digital inputs and 8 relay outputs
• 4 special outputs for lighting control and energy saving
• Access GV-AS100 / 110 / 120’s features through Web-based interfaces
• Route digital I/O controls from GV-AS100 / 110 / 120 to avoid tamper and enhance
security level
• Support 4 units of GV-Readers and GV-GF Fingerprint Readers
9.1.2 Packing List
• GV-ASBox
• Power Adaptor 12V DC
• Power Cord
• Battery power cable
• Software CD
• Warranty Card