User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
180
9.2 Optional GV-ASNet
The optional GV-ASNet is the network expansion module for GV-AS100, GV-AS110 and
GV-AS120. With the GV-ASNet, GV-AS100 / 110 / 120 can be connected to the GV-
ASManager and you can access the Web interface of GV-AS100 / 110 / 120.
9.2.1 Main Features
• Add TCP/IP networking capability to GV-AS100 / 110 / 120
• Access GV-AS100 / 110 / 120’s features through Web-based interfaces
• Support 2 units of GV-Readers and GV-GF Fingerprint Readers
9.2.2 Packing List
• GV-ASNet
• Power Adaptor 12V DC
• Power Cord
• Battery Power Cable
• Software CD
• Warranty Card