User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
Optional Devices
181
9
9.2.3 GV-ASNet Overview
Front View Rear View
Figure 9-9
No. Name Function
1 DC Power Input (12V) Connects to power supply.
2 Web Setting
Enables the Advanced Settings on Web interface of GV-
AS100/GV-AS110/GV-AS120.
3 Micro SD The Micro SD slot is not functional at this point.
4 Ethernet Connects to the network.
5 12V+/12V- Battery Power supply for GV-AS100/GV-AS110/GV-AS120.
6 RS485A+/RS485A- Connects to GV-AS100/GV-AS110/GV-AS120.
7 RS485B+/RS485B- Connects to GV-Readers.
8 Terminal A/B Enables RS-485 interface.
9 Default button Resets all configurations to factory defaults.
10 Power LED
Shows the power source and battery charging status of the
GV-ASNet. See 9.2.4.C Other Settings for more details.