User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
2
1.1 Introduction
GV-AS100 / 1010 is a single door controller with a built-in a card reader and a LCD display.
You can connect one more card reader to GV-AS100, and up to two more card readers to
GV-AS1010 for entry and exit applications. GV-AS100 / 1010 has the capability to store up
to one thousand cards as a standalone model and up to 40,000 cards when connected to
GV-ASManager. The programming is either done on the keypad or from the software GV-
ASManager.
GV-AS100 / 1010 is suitable for controlling doors, parking gates and access to elevator call
buttons.
GV-AS100
IN
Wiegand / RS-485
Reader
OUT
Door
RS-485
GV-HUB /
GV-COM /
GV-NET/IO Card
RS-232
GV-ASManager
Figure 1-1