User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
186
9.2.5 GV-ASNet Specifications
CPU 32-bit ARM7TDMI Microprocessor
Power 100 ~ 240V AC, 50 ~ 60 Hz
Battery 12V, 5Ah and 12V, 12Ah
RS-485 Interface
1 RS-485 interface only for GV-Readers and
GV-GF Fingerprint Readers (Max. 2 readers)
GV-AS100/110/120 RS-485
Communication
Protocol
GV-ASManager TCP/IP (10/100 Mbps Ethernet)
Operating Temperature 0 ~ 65°C / 32 ~ 149°F
Operating Humidity 10% ~ 90% RH (non-condensing)
Dimensions (W X H X D) 118.3 x 74 x 40 mm / 4.7 x 2.9 x 1.6 in
Weight 300 g / 0.66 lb
Certification CE, FCC, RoHS
All specifications are subject to change without notice.