User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
Optional Devices
187
9
9.3 Web Interface through Optional Devices
Through GV-ASBox or GV-ASNet, you can access the GV-AS100 / GV-AS110 / GV-
AS120’s Web interface. Also through GV-ASBox or GV-ASNet, GV-AS100, GV-AS110 or
GV-AS120 can communicate with GV-ASManager over the network.
GV-ASBox and GV-ASNet must be assigned an IP address to make it accessible on the
network. Refer to Chapter 7 Installing on a Network for detailed instructions.
The Web interface is divided into three sections: Basic Setting, Advanced Setting and
Extended Device.
9.3.1 Basic Setting
The Basic Setting section consists of four setup pages:
Category Setting Description
Network Setting
There are different methods to install GV-
ASBox and GV-ASNet on the network. See
Chapter 7 I
nstalling on a Network.
Other Setting See 8.1.1 System Setup.
Firmware Upgrade See 8.1.2 Upgrading Firmware.
Basic Setting
Account Setting See 8.1.3 Changing Login ID and Password.