User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
188
9.3.2 Advanced Settings
You can execute and edit door/Wiegand operations and settings, turn on Alarms, view status,
display card information stored in GV-AS100 / 110 / 120, set the device time and edit the
input/output functions.
The changes in some of the Advanced Setting page will effect the options available on other
pages. The diagram below shows the relationships between each Advanced Setting page.
The Relationship Diagram between each Advanced Setting Page
Affects
Affects
Affects
Figure 9-14
Note: The Status Monitor and In/Out Function pages are only available when connecting
through a GV-ASBox.