User Manual

Optional Devices
191
9
 Fixed Card + PIN Mode: Grants access after the user presents the card and then
enters the card’s PIN code, and ignores the authentication schedule of GV-
ASManager.
 Fixed Card/Common mode: Grants access after the user presents the card or
enters the door’s password, and ignores the authentication schedule of GV-
ASManager.
 Authentication Schedule Mode: Follows the authentication schedule set on GV-
ASManager.
[Door/Gate B]
This option is only available for GV-ASBox and only becomes available after Door/Gate B is
selected from the ASBox Wiegand option above.
Select the function type and authentication mode for the use of Door/Gate B. The Function
and Authentication Mode options are the same as those of Door/Gate A. But remember that
the settings here are used to define the Wiegand reader connected to GV-ASBox.
[Anti-Passback]
This setting lets you perform Anti-Passback applications across multiple GV-AS Controllers.
Anti-Passback prevents use of a card to gain successive entries without exit to a controlled
area. For details on setup, see Chapter 6 Anti-Passback on GV-ASManager User’s Manual.
 Enable/Disable: Enables or disables the Anti-Passback function.
 Info IP: Enter the IP address of the next corresponding GV-AS100 / 110 / 120.
[Delete MasterCard]
 Delete: Click the Delete button to delete the current MasterCard information.
Click Submit button to save the changes, or click Cancel button to return the changes to its
previous state.