User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
22
1.3.1 Quick Reference of Programming Table
GV-AS100
Card Manger
Add New Card 1) N, 2) A, 3) B, 4) S
Del Card Data
Reset Card’s APB
Display System
Door’s Auth Mode
Door’s Event
ASBox Comm. State
Memory’s State
ID & IP Address
Display Version
Set Parameter
Set Local Time
Set AS100 ID
Set Auth. Mode
Auth. Schedule
Fixed Card Mode
Fixed Card + PIN
Fixed Card Common
Local Unlock Mode
Local Lock Mode
AS100 Function
GV-ASBox
Control Type Door Entry Type Anti-Passback
Door Exit Type Anti-Passback
Parking Entry Type Anti-Passback
Parking Exit Type Anti-Passback
Elevator Control
Master PIN Change
Local Rest Time
Set Held Open Time
Set Alarm Event
Held Open Alarm
Force Open Alarm
Fire Alarm
Tamper Alarm
Access Denied
Set Fire Action
Unlock Door/Gate
Lock Door/Gate
Unchanged
Set Contact Type
Door/Car Sensor
Door/Gate Button
Fire Sensor