User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
GV-AS100 / 1010 Controller
29
1
1.3.6 Displaying System Information
To display system information, press the code ＊347 (＊DIS).
Option Function
Door’s Auth. Mode Displays the authentication mode of the door.
Door’s Event Displays what kind of event happened at the door.
ASBox Comm. State
(GV-AS100 only)
Displays the connection status with GV-ASBox / GV-ASNet.
User Disenable: The connection to GV-ASBox / GV-ASNet
is not enabled.
Comm. Fail: The connection to GV-ASBox / GV-ASNet
failed.
Comm. Normal: The connection to GV-ASBox / GV-ASNet
succeeded.
Memory’s State Displays the memory usage of GV-AS100 / 1010.
Capacity: Displays the total number of events that can be
recorded on GV-AS100 / 1010. The maximum number is
65536. GV-AS100 / 1010 will overwrite the oldest events
when the limit is reached. When GV-AS100 / 1010 is
connected to GV-ASManager, the event data will be
uploaded to the server and the buffer of GV-AS100 / 1010
will be cleared.
Stored: Displays the number of events that has been
recorded.
ID & IP Address Displays the ID and IP address of GV-AS100 / 1010.
Display Version Displays the firmware version of GV-AS100 / 1010.