User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
30
1.3.7 Restoring Factory Defaults
The restore function is used to clear all configured options and cards from GV-AS100 / 1010
memory and bring back the unit to factory defaults.
IMPORTANT: Restoring default settings will delete all cards enrolled on GV-AS100 / 1010.
1. Press the code ＊737 (＊RES).
2. Present the Master Card or Enroll / Delete Card and enter PIN Code.
The LCD displays Default Setting 1. Yes? 2. No?.
3. Press 1. The LCD displays Default Setting Memory Test…
4. When the unit returns to factory defaults, the LCD displays Enter Master Card.