User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
GV-AS100 / 1010 Controller
33
1
GV-AS1010
CPU 32-bit ARM7TDMI
Number of User Cards 1,000 / 40,000 cards (standalone / networked mode)
Frequency
13.56 MHz for ISO14443A (Mifare DESFire, Mifare Plus
and Mifare Classic)
Event Buffer 65,536 events and log data
Power 12V DC, 1.25A
RS-485 Interface
1 RS-485 interface for GV-Readers and GV-GF
Fingerprint Readers (max. 2 readers)
TCP/IP Interface 1 TCP/IP interface for GV-CR420 and GV-GF1921 / 1922
Communication Protocol TCP/IP
Input 3 inputs, dry contact, NO / NC
Digital I/O
Output 2 relay outputs (30V DC, 5A; 110V AC ~ 250V AC, 5A )
Supported ID Formats Built-in reader reads both GID and UID
Operating Temperature 0 ~ 65°C / 32 ~ 149°F
Operating Humidity 10% ~ 90% RH (non-condensing)
Dimensions (W X H X D) 96 x 137 x 27 mm / 3.78 x 5.39 x 1.06 in
Weight 250 g / 0.55 lb
Ingress Protection IP54
Certification CE, FCC, RoHS
All specifications are subject to change without notice.