User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
36
GV-AS110 can make network connection to GV-ASManager using the optional GV-ASBox
or GV-ASNet. With GV-ASBox, two-door control is also possible as illustrated below.
GV-AS110
IN
Wiegand Reader
OUT
GV-ASManager
Door
Door
TCP/IP
RS-485
Wiegand / RS-485
Reader (x4)
GV-ASBox
Figure 2-2 Through GV-ASBox
Door
GV-AS110
IN
GV- ASManager
TCP/IP
RS-485
RS-485
Reader (x2)
Wiegand Reader
OUT
GV-ASNet
Figure 2-3 Through GV-ASNet