User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
GV-AS110 / 1110 Controller
39
2
2.2 Installation
The wire assignment of the GV-AS110 cable data are illustrated below.
Front View
Figure 2-4
Rear View
Wire color Definition
Red 12V DC
Black GND
Green Wiegand Data 0
White Wiegand Date 1
Blue RS485+
Light Blue RS485-
Yellow Door Sensor IN1
Orange Button IN2
LRed Fire Sensor IN3
Brown IN COM (GND)
Purple Alarm COM
Gray Alarm NO
Brown White Door COM
Black White Door NC
GV-AS110
Light Green Door NO
Figure 2-5