User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
62
3.1.1 Main Features
• 1 door (one-way and two-way control), expandable to 2 doors with optional GV-ASBox
• 1,000 / 40,000 cards (standalone / networked or RS-485 mode)
• Built-in 2 digital inputs and 1 relay output
• 1 Wiegand output (26 ~ 64 bits) for extra reader programming
• Built-in 13.56 MHz Reader
• Built-in tampering alarm sensor
• Weather-proof and IP66-compliant housing (for outdoor use)
3.1.2 Packing List
• GV-AS120
• Power Adaptor 12V DC / 1.25A
• Power Cord
• Screw x 3
• Screw Anchor x 2
• Security Torx
• Enroll Card
• Delete Card
• GV-AS ID F Card x 20
• Software CD
• Warranty Card