User Manual
Table Of Contents
- Welcome
- Important Notes for Maintaining Power Supply
- Elevator Control
- Optional Devices
- Installation Considerations
- Firmware and Software Compatibility
- Definition
- 1. GV-AS100 / 1010 Controller
- 1.1 Introduction
- 1.2 Installation
- 1.3 Programming Mode
- 1.4 Web-Based Configurations
- 1.5 GV-AS100 / 1010 Specifications
- 2. GV-AS110 / 1110 Controller
- 3. GV-AS120 Controller
- 4. GV-AS210 / 2110 / 2120 Controller
- 5. GV-AS410 / 4110 / 810 / 8110 Controller
- 6. GV-EV48 Controller
- 7. Installing on a Network
- 8. The Web Interface
- 9. Optional Devices
- 9.1 Optional GV-ASBox
- 9.1.1 Main Features
- 9.1.2 Packing List
- 9.1.3 GV-ASBox Board Layout
- 9.1.4 Installation
- 9.1.5 GV-ASBox Specifications
- 9.2 Optional GV-ASNet
- 9.3 Web Interface through Optional Devices
- 9.1 Optional GV-ASBox
- 10. Troubleshooting
- Appendix
vii
Welcome
This user manual includes the following types of GV-AS / GV-EV Controllers:
GV-AS Controllers
Doors Supported
One-Way Control Two-Way Control
Page
Number
GV-AS100 / 1010
1 1 See p. 1
GV-AS110 / 1110
1 1 See p. 34
GV-AS120
1 1 See p. 59
GV-AS210 / 2110 /
2120
4
2 (Wiegand only)
4 (Wiegand + RS-485 / Network)
See p. 74
GV-AS410 / 4110
4 4 See p. 92
GV-AS810 / 8110
8
4 (Wiegand only),
8 (RS-485 / Network)
See p. 92
GV-EV Controllers
Floors Supported Readers Supported
Page
Number
GV-EV48-24 Floors
24
GV-EV48-48 Floors
48
2 (RS-485 or Network) See p.112