User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
90
4.3.6 RTSP
The RTSP Server enables video and audio streaming to your 3G-enabled mobile phone.
Figure 4-20
Activate Link: Enable the RTSP / 3GPP service.
RTSP/TCP Port: Keep the default value 8554, or modify it if necessary.
RTP/UDP Port: Keep the default range from 17300 to 17319, or modify it if necessary.
The number of ports for use is limited to 20.
Max Connection: Set the maximum number of RTSP and 3GPP connections to your
camera. The maximum value is 8.
Enable Audio: This option is enabled by default. Select to enable audio streaming
through RTSP. Note this function is not available for GV-IP LPR Camera 5R.
Disable Authentication: Authentication is disabled by default, with which the ID and
password of your camera are not required when accessing live view through the RTSP
command.
For details on remote monitoring with mobile phones, see Smart Device Connection, Chapter
8. For RTSP command, see Appendix B RTSP Protocol Support.