User Manual

Table Of Contents

Administrator Mode

4.3.10 Registry Database

Note this function is only available for GV-LPR1200. You can automatically activate an output,

for example, opening a gate when a captured license plate matches a number from the

database based on the selected matching criterion.

This vehicle database is transmitted from GV-ASManager and saved on the memory card. To

set up the connection with the GV-ASManager for database download, see GV-ASManager

Connection, Chapter 9.

Figure 4-25

To use this function:

• Make sure a memory card is inserted to the camera and the storage settings are

configured. For detail, see 4.7.2 Storage Settings.

• Make sure the camera is connected with GV-ASManager to download the vehicle

database, or the inserted memory card already contained the vehicle database.

• Make sure the output settings of the gate or barrier are configured and enabled. The

gate or barrier must be connected to output 1 of GV-LPR1200. For detail, see 4.2.2

Output Settings.

Note: This function is only supported for GV-ASManager V4.3 or later.