User Manual

Administrator Mode
109
4
4.6.5 SNMP Settings
The Simple Network Management Protocol (SNMP) allows you to monitor the status of the
camera through SNMP network management software.
Figure 4-34
To allow management of SNMP software:
1. Select Enable SNMPv1 SNMPv2c to enable the function.
2. To enable access to Read/Write Name, type a community string. This will serve as a
password to allow read and write access to the camera from the SNMP software.
3. To enable Read Only Name, type a community string to allow read-only access to the
camera from the SNMP software.
4. For a more secured connection, select Enable SNMPv3 to enable SNMP version 3.
5. To enable access to Read/Write Name, type a community string.
6. Select an Authentication Type to be used for SNMP requests.
7. Type the Authentication Password and Current Password (Encrypted). You will need
to type these passwords in the SNMP software to be able to access the camera.