User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
DVR Configurations
131
6
6.1 Setting Up IP Cameras on GV-System
Follow the steps below to manually connect your camera to GV-System.
Note: The following instructions are based on V8.5.7.0 software and user interfaces.
1. On the GV-System’s main screen, click the Configure button, select System Configure,
select Camera Install and click IP Camera Install. This dialog box appears.
Figure 6-1
• To automatically set up an IP camera, click Scan Camera to detect any IP cameras
on the same LAN.
• To manually set up an IP camera, click Add Camera.
• To import IP cameras from the GV-IP Device Utility, click Import Camera.
• To map IP devices through the GV-IP Device Utility program, click IP Device Utility.
• To add all IP cameras within the IP address range, click Automatic Setup.
2. Click Add Camera. This dialog box appears.
Figure 6-2