User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
132
3. Type the IP address, username and password of the camera. Modify the default HTTP
port if necessary.
Figure 6-3
4. Select GeoVision from the Brand drop-down list and select your camera from the Device
drop-down list. This dialog box appears.
Figure 6-4
Dual Streams: Click this button to set the codec type to MJPEG in the main stream
and to H.264 in the sub stream with the resolutions listed below.
Port: Modify the video streaming port number if necessary.
Stream Number: Click the Query button and select Single Stream or Dual Streams.
Codec type: The live view codec and resolution settings are displayed here.
Resolution: Select resolutions for preview and recording.
5. Click Apply. The camera is added to the list.