User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
DVR Configurations
139
6
6.3 Remote Monitoring with Multi View
Note that Multi View is only supported by GV-IP LPR Camera 5R / GV-LPC1100. You can
monitor the live view of the camera using the Multi View.
Connecting to the Camera
The Multi View program is available in the GV-System applications, and is also included in the
Software DVD as an independent program. The following is an example of running the Multi
View through WebCam Server on the GV-System.
1. To enable the remote access to the GV-System, click the Network button, select
WebCam Server to display the Server Setup dialog box, and click OK to start the
WebCam server.
2. At the local computer, open the Web browser and type the IP address of the GV-System.
The Single View page appears.
3. Select Multi View and the desired viewing resolution. The valid user name and password
are required for login. For the first-time user, you will be directed to the Download page.
Install the Multi View program before you can run it.
4. On the Multi View window, click the Edit Host button. The Edit Host window appears.
5. To create a host, click the New button. You need to create a group before creating a host.