User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
Appendix
A. The CGI Command
You can obtain a snapshot of the live view or access the User Account Web interface simply
by executing CGI commands. Follow the details below:
IP address: 192.168.2.11
Username: admin
Password: admin
Desired Stream: 1
To obtain a snapshot of live view, type the following into your Web browser:
http://192.168.2.11/PictureCatch.cgi?username=admin&password=admin&channel=1
To access the User Account settings on the Web interface, type the following into your
Web browser:
http://192.168.2.11/ConfigPage.cgi?username=admin&password=admin
&
page=UserSetting
162