User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
1.2.4 Device Installation
1.2.4.1 Installation Guidelines
To produce quality image and to avoid software recognition errors, make sure you adhere to the
guidelines when installing your GV-LPC1100. See GV-LPR Camera Installation Guide.
1.2.4.2 Installing the Camera
After you have read through the installation guides and chosen an installation site, follow the
steps below to install the GV-LPC1100.
1. Mark the installation site and drill four holes for screw anchors.
2. Insert the supplied screw anchors.
3. Secure the camera to the wall using the supplied screws.
Figure 1-15
4. Connect the camera for power and network connection. See 1.2.5 Connecting the Camera.
5. Access the live view. See Getting Started, Chapter 2.
16