User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
i
Preface
Welcome to the GV-IP LPR Camera User’s Manual.
The GV-IP LPR Camera has a series of models designed to meet different needs. This
manual is designed for the following models and firmware versions:
Models Firmware Version
GV-IP LPR Camera 5R 1.01
GV-LPC1100 1.01
GV-LPC1200 1.0
GV-LPR1200 1.01
Note: GV-LPC1100 is also referred to as GV-IP LPR Camera 10R.
IMPORTANT: When using GV-LPC1200 / GV-LPR1200 for the first time, you need to
remove the plastic insulation film under the battery and change the silica gel bag. For
details, see 1.3.6 Replacing the Silica Gel Bag and 1.3.7 Fitting the Battery.