User Manual

Introduction
1
1.3.8 Installing a Mini USB Cable
To use UMTS-compatible devices, you need to prepare a Mini USB-to-USB cable with the
size of the Mini USB end smaller than 1 cm for threading and install it into the camera. Follow
the steps for installation.
1 cm
Mini USB end
Camera’s bottom
Figure 1-33
1. Loose 2 screws to open the camera’s lid and 4 screws to remove the camera mount with
the torx wrench.
Camera’s Lid
Camera Mount
Figure 1-34
2. Rotate to remove the indicated cap and remove the plug.
Plug
Figure 1-35
33