User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
Accessing the Camera
43
3
3.3 The Control Panel of the Live View Window
To open the control panel of the Live View window, click the arrow button on top of the viewer.
You can access the following functions by using the right and left arrow buttons on the control
panel.
Click this arrow button to
open the control panel
Arrow buttons
Click this button to select
from a drop-down menu
Figure 3-3
[Information] Displays the version of the camera, local time of the local computer, time of the
camera, the number of users logging in to the camera and the OCX registration path.
[Video] Displays the current video codec, resolution and data rate.
[Audio] Displays the audio data rates when the microphone and speaker devices are
enabled.
[I/O Control] Note this function is only supported by cameras with I/O function. Provides a
real-time graphic display of the input and output status. You can force the output to be
triggered by double-clicking its icon.
[Alarm Notify] Displays the captured images by motion detection. For this function to work,
you must configure the Alarm Notify settings first. See 3.7 Alarm Notification.