User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
Accessing the Camera
51
3
3.9 Remote Configuration
You can upgrade the device firmware over the network. Click the Show System Menu button
(No. 8, Figure 3-2), and select Remote Config. The Remote Config dialog box will appear.
[Firmware Upgrade] In this tab, you can upgrade the firmware over the network. For details,
see Chapter 5 Advanced Applications.
3.10 Camera Name Display
To display the camera name on the image, click the Show System Menu button (No. 8,
Figure 3-2), and select Show Camera Name.
3.11 Image Enhancement
To enhance the image quality of live video, click the Show System Menu button (No. 8,
Figure 3-2), and select Image Enhance. This dialog box appears.
Figure 3-11
De-Interlace: Covert the interlaced video into non-interlaced video.
De-Block: Remove the block-like artifacts from low-quality and highly compressed video.
Enable DirectDraw: Activate the DirectDraw function.