User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
60
[GOP Structure and Length]
Set the maximum number of seconds between every key frame.
[Text Overlay Settings]
Overlaid with camera name: Includes camera names on live and recorded videos.
Overlaid with date stamps: Includes date stamps on live and recorded videos.
Overlaid with time stamps: Includes time stamps on live and recorded videos.
Overlaid with digital input description name: Includes the name of the selected input
on live and recorded videos. Note this function is not available for GV-IP LPR Camera
5R.
[Watermark Setting]
Enable this option to watermark all recordings. The watermark allows you to verify whether
the video has been tampered while it was recorded. See 5.4 Verifying Watermark.
[TV Out]
Select the signal format for the video output of the camera as either NTSC or PAL. This
function is disabled by default. Note this function is not available for GV-IP LPR Camera 5R.
Note: For smooth live view display of GV-IP LPR Camera 5R / GV-LPC1100 on TV monitor,
the video resolution must be of 1280 x 1024 or lower. If dual streams are enabled, the sub
stream must be set to 640 x 480.
[LED Control]
Ready LED: Select Disable if you do not wish to use the Status LED. Note this function is
only available for GV-LPC1100.