User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
66
[Detection Mode] From the drop-down list on top left, select a method to activate license
plate recognition.
Disable: Deactivate recognition.
Motion (Stationary Camera): Activate recognition by motion detection. Select this
mode if your camera is fixed at one place.
Motion (Mobile Camera): Activate recognition by motion detection. Select this option if
your camera is not fixed at one place or is installed on a vehicle.
Motion (Continuous Recognition): Activate round-the-clock recognition.
Parking (I/O): This option is designed for parking areas. The recognition is activated by
input triggers at the parking area. Select which inputs will trigger recognition in the I/O
Mode Setting section below.
Parking (Motion): This option is designed for parking areas. The recognition is
activated by motion detection at the parking area. Select this option if the parking area
is without a gate installed to trigger the recognition.
If the recognition is still repeating, it will notify after the specified second: Select
this option to avoid multiple recognition results for the same license plate due to the
position of the camera. Specify the duration of a recognition result to be displayed if the
next license plate recognized is the same as the previous one.
[Motion Detection Setting]
Output recognition result quickly (It will increase error rate of recognition
system): Select this option if you want to have a faster recognition result at the cost of
accuracy. This option is suitable for a large amount of traffic and the frames received
will go through a fast recognition process (approximately at the processing rate of 1
frame per second).
Detected Sensitivity: Select the sensitivity level of motion detection from the
drop-down list. The default value is set to 5. The higher the value, the more sensitive
the system is to the motion.
Detected Object Size: Select the value of the targeted object’s normal size. The
default value is set to 1. The higher the value, the bigger the object’s size is.