User Manual

Administrator Mode
67
4
[Recognition and Motion Area Setting] To configure the area of motion detection and
plate recognition, first click Reset to clear the default setting. Then drag the mouse button
to select an area of the image. You can define up to 8 areas to outline your detection areas.
Every time when an area is selected, you will be prompted for confirmation.
Click Save to save the defined areas.
[I/O Mode Setting]
 Trigger Input: Select to trigger Input 1 or Input 2.
 Force Export (Used in I/O Mode): Select to display the symbol ****** to represent
unknown license plates even though the recognition fails. If the option is not selected,
the recognition failure will not be recorded.
 Capture Frame Number in Each Triggered (1~5): Select the number of image frames
from 1 to 5 to be captured when the recognition is activated by input trigger.
 Repeat Recognition when Recognition Failed (0~3): Select the number of
recognitions from 1 to 3 to be performed after the recognition fails and being activated
by input trigger.
Click Apply to take effect.
For the related settings of input devices, see 4.2.1 Input Setting.