User Manual
Table Of Contents
- Naming Definition
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Installing Camera Outdoor
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Accessing the Camera
- 3.1 Accessing Your Surveillance Images
- 3.2 The Live View Window
- 3.3 The Control Panel of the Live View Window
- 3.4 Snapshot of a Live Video
- 3.5 Video Recording
- 3.6 Picture-in-Picture and Picture-and-Picture View
- 3.7 Alarm Notification
- 3.8 Video and Audio Configuration
- 3.9 Remote Configuration
- 3.10 Camera Name Display
- 3.11 Image Enhancement
- 3.12 I/O Control
- 3.13 Visual Automation
- Chapter 4 Administrator Mode
- Chapter 5 Advanced Applications
- Chapter 6 DVR Configurations
- Chapter 7 CMS Configurations
- Chapter 8 Smart Device Connection
- Chapter 9 GV-ASManager Connection
- Specifications
- Appendix
82
4.3.2 FTP
You can also send the captured image to a remote FTP server for alerts.
Important: To send FTP alert upon motions, be sure to set up the detection area on the
Motion Detection page. For details, see 4.1.2 Motion Detection / Detection Mode.
Figure 4-16
[Upload to a FTP server]
1. Select Enable to set up the FTP function.
2. Server URL/IP Address: Type the URL address or IP address of the FTP Server.
3. Server Port: Type the port number of the FTP Server or keep the default value 21.
4. Type the Username and Password of the FTP Server.
5. Remote Directory: Type the name of the storage folder on the FTP Server.
6. Alerts interval time in minute: Specify the interval between FTP alerts. The interval can
be between 0 and 60 minutes. The option is useful for frequent event occurrence. Any
event triggers during the interval period will be ignored.