Quick Start Guide

No. Name Description
1 LED Indicators
The power LED (top) turns on (green) when
the power is on and turns off when there is
no power supply. The status LED (bottom)
turns on (green) when the system operates
normally and turns off when system error
occurs.
2 Audio Out Connects to a speaker for audio output.
3 Audio In Connects to a microphone for audio input.
4 LAN / PoE Connects to a 10/100 Ethernet or PoE.
5 DC 12V Connects to power.
6 Default Button
Resets the camera to default settings. See
27. Restoring to Default Settings in e
Quick Start Guide.
th
7 Rotational Screw Loosens to rotate the camera.
8 Cable seal Waterproofs the Ethernet cable.
9 Tilt Screw Loosens the screw to tilt the camera.
10 TV-Out
Provides video input (D1 resolution) for a
monitor.
11 Silica Gel Bag Absorbs moisture in the camera body.
12 Zoom Screw Adjusts the zoom of the camera.
13 Focus Screw Adjusts the focus of the camera.
14 Conduit Connector Waterproofs the audio wires.
Note: To use the TV out function, connect the supplied black BNC wire
to a monitor and select your signal format (NTSC or PAL) at the V Out T
field on the Web interface. The default signal format is NTSC. For details,
see 4.1.1 Video Settings, GV-IPCam Firmware Manual. The TV-out wire
must be removed before you secure the housing cover.
176