Quick Start Guide
Table Of Contents
- Contents
- Introduction
- Options
- Note for Connecting to GV-System / GV-VMS
- Note for Recording
- Note for Adjusting Focus and Zoom
- Note for Installing Camera Outdoor
- Note for Closing the Bullet Camera Cover
- Note for Bullet Waterproof Failures
- Note for USB Storage and WiFi Adapter
- Note for Silica Gel Bags
- 1. Box Camera
- 2. Ultra Box Camera
- 3. Target Box Camera
- 4. IR Arctic Box Camera
- 5. Mini Fixed Dome & Mini Fixed Rugged Dome
- 6. Target Mini Fixed Dome
- 7. Target Mini Fixed Rugged Dome
- 8. Bullet Camera (Part I)
- 9. Bullet Camera (Part II)
- 10. Bullet Camera (Part III)
- 11. Ultra Bullet Camera
- 12. Target Bullet Camera (Part I)
- 13. Target Bullet Camera (Part II)
- 14. Vandal Proof IP Dome (Part I)
- 15. Vandal Proof IP Dome (Part II)
- 16. Vandal Proof IP Dome (Part III)
- 17. Target Vandal Proof IP Dome
- 18. Fixed IP Dome
- 19. Target Fixed IP Dome
- 20. Cube Camera
- 21. Advanced Cube Camera
- 22. PT Camera
- 23. Pinhole Camera
- 24. Accessing the Camera
- 25. The Web Interface
- 26. Upgrading System Firmware
- 27. Restoring to Default Settings
- 27.1 Using the Web Interface
- 27.2 Directly on the Camera
- Box Camera
- Ultra Box Camera and Target Box Camera
- Mini Fixed Dome
- Mini Fixed Rugged Dome
- IR Arctic Box Camera
- Target Mini Fixed Target Mini Fixed Rugged Dome
- Bullet Camera
- Ultra Bullet Camera
- Target Bullet Camera
- Vandal Proof IP Dome
- Fixed IP Dome
- Target Fixed IP Dome
- Cube Camera
- Advanced Cube Camera
- PT Camera
- Pinhole Camera
No. Name Description
1
DC 12V / AC 24V
Terminal Block
Connects to a DV 12V or AC 24V Power
Adapter.
2 LAN / PoE Connects to a 10/100 Ethernet or PoE.
3 I/O Terminal Block
Connects to I/O terminal device. For
details, see I/O Terminal Block, PTZ
Camera Chapter, GV-IPCAM Firmware
Manual on the Software DVD.
4 Memory Card Slot
Receives a micro SD card (SD/SDHC,
version 2.0 only, Class 10) to store
recording data.
5 Audio Out Connects a speaker for audio output.
6 Audio In Connects a microphone for audio input.
7 Status LED
Turns green when the system operates
normally and turns off when system error
occurs.
8 Power LED
Turns green when the power is on and
turns off when the power is off.
9 Focus Ring
Manually rotates this ring left or right to
adjust focus.
10 IR
Turns on to automatically illuminate a
surveillance area by infrared light to
produce clearer images during the night.
11 Microphone Records the sounds.
12 Default
Resets the camera to default settings. See
24. Restoring to Default Settings in the
Quick Start Guide.
222