Manual



Introduction

GV‐EV48isanelevatorcontrollerdesignedtocontrolaccessof1elevatorwithamaximumof48floors.Upto2GV‐Readers/GV‐GF

FingerprintReaderscanbeconnectedtoGV‐EV48usingRS‐485connectionandnetworkconnection.GV‐EV48canrecognize

identificationcardsandgrantaccesstotheau

thorizedfloorsonly.



KeyFeatures

 Grantaccesstospecificelevatorfloorsusingaccesscards,card'sPINcodeorfingerprint

 GV‐EV48–24Floors:Built‐in24relayoutputstosupportupto24elevatorfloors

 GV‐EV48–48Floors:Built‐in48relayoutputstosupportupto48elevatorfloors

 Sup

portupto2GV‐Readers/GV‐GFFingerprintReadersthroughnetworkconnectionandRS‐485connection

GV-EV48 January 16, 2014

-1-

PAGE 1
Introduction GV‐EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GV‐Readers / GV‐GF Fingerprint Readers can be connected to GV‐EV48 using RS‐485 connection and network connection. GV‐EV48 can recognize identification cards and grant access to the authorized floors only.
PAGE 2
 Specifications System Requirements GV‐ASManager Version Hardware CPU Number of User Cards Event Buffer Power RS‐485 Interface Communication GV‐EV48‐24 Floors Output GV‐EV48‐48 Floors Operating Temperature Operating Humidity Dimensions (W x H x D) Weight Certification GV‐ASManager V4.1 or later 32‐bit ARM7TDMI 40,000 cards 1,000,000 events and log data AC 100~250 V , 50~60Hz 1 RS‐485 interface only for GV‐Readers and GV‐GF Fingerprint Readers (max.