User Manual

Administrator Mode

3.3.5 Media Stream

Media Stream

By configuring media stream, you can set the camera to transmit code streams by UDP or

TCP protocol to a specified IP address and port number. The settings can be saved and take

effect after the camera is rebooted.

Figure 3-17

. Click 1 and select a stream from the Stream Profile drop-down list.

p for the decoding

h the media stream that has been

2. Type the IP Address and Port number of the unicast or multicast grou

device that receives video streams from the camera.

3. Select a Protocol type for the media stream.

4. If you want the device to automatically establis

previously configured after the restart, Enable Persistent.

5. To delete a stream, click

6. Click OK to complete the settings.