User`s manual

DVR Configurations
6
6.1 Setting Up IP Cameras
Follow the steps below to manually connect your GV-Hybrid LPR Camera 20R / 10R / GV-IP
LPR Camera 5R to GV-System.
Note: The following instructions are based on V8.5.7.0 software and user interfaces.
1. On the GV-System’s main screen, click the Configure button, select System Configure,
select Camera Install and click IP Camera Install. This dialog box appears.
Figure 6-2
• To automatically set up an IP camera, click Scan Camera to detect any IP cameras
on the same LAN.
• To manually set up an IP camera, click Add Camera.
• To import IP cameras from the GV-IP Device Utility, click Import Camera.
• To map IP devices through the GV-IP Device Utility program, click IP Device Utility.
• To add all IP cameras within the IP address range, click Automatic Setup.
2. Click Add Camera. This dialog box appears.
Figure 6-3
109