User`s manual

1.1.6 Connecting the Camera

Follow the steps below to connect your GV-Hybrid LPR Camera 20R / 10R.

1.1.6.1 GV-Hybrid LPR Camera 20R

1. Optionally connect a speaker to the green RCA wire and an external microphone to the

pink RCA wire.

2. Optionally connect a monitor to the black BNC wire. Enable the TV-Out function by

selecting the correct signal format at the TV Out field on the Web interface. See 4.1.1

Video Settings.

3. Connect the camera’s cable to the GV-PA481 PoE adapter as illustrated below. The

power and network will be supplied simultaneously.

4. Connect the external IR Illuminator’s cable to the power source.

Figure 1-10

5. When the status LED of the camera is on, .you are ready to access the live view, adjust

the image clarity and configure the basics. See Getting Started, Chapter 2.

CAUTION: The surface of the external IR Illuminator is at the high temperature of up to

50°C (122°F) during operation of the GV-Hybrid LPR Camera 20R.