User`s manual

78
To enable the DDNS function:
1. Enable: Enable the DDNS function.
2. Service Provider: Select the DDNS service provider you have registered with.
3. Host Name: Type the host name used to link to the GV-Hybrid LPR Camera 20R / 10R /
GV-IP LPR Camera 5R. For the users of GeoVision DDNS Server, it is unnecessary to fill
the field because the system will detect the host name automatically.
4. User Name: Type the user name used to enable the service from the DDNS.
5. Password: Type the password used to enable the service from the DDNS.
6. Click Apply.
[HTTP Port Settings]
The HTTP port enables connecting the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR
Camera 5R to the Web. For security integration, the Administrator can hide the server from
the general HTTP port by changing the default HTTP port 80 to a different port one within the
range of 1024 through to 65535.
[HTTPS Settings]
By enabling the Hypertext Transfer Protocol Secure (HTTPS) settings, you can access the
GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR Camera 5R through a secure protocol. Note
the customized certification function is currently not supported in GV-IP LPR Camera 5R.
[Camera Streaming Port Settings]
The VSS port enables connecting the GV-Hybrid LPR Camera 20R / 10R / GV-IP LPR
Camera 5R to the GV-System. The default setting is 10000.