User`s manual

Administrator Mode
89
4
The storage device status is shown in the status column:
Status Description
Formatting The storage device is being formatted.
Unknown The camera can not recognize the format of the storage device or the
OK Storage formatting is successful.
Try Mount The camera is attempting to connect to the storage device.
Error File There is a recording error in the storage device. All the recording data is
Read Only The storage device cannot be written due to abnormal power disruption.
Repairing The system is attempting to repair the recording data.
Note:
1. If Enable Recycling is selected, the available space of the storage device must be higher
than the space you specified at the Stop recording or recycle disk when free space of
disk is smaller than x option. Otherwise no video will be recoded.
2. The recording data may be lost if you remove the storage device during recording.
3. If you do not remove the storage device properly, the data cannot be read in another
computer. In this case, re-plug the storage device back to the camera. The system will
repair the data automatically. When the system is repairing the data, the Remove field will
display “Repairing”.