User`s manual
Table Of Contents
- Copyright
- Contents
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Configuration
- Chapter 4 Video Playback
- Chapter 5 Remote Access to the GV-SNVR
- Chapter 6 Advanced Applications
- Specifications
- Appendix
System Configuration
3
33
[WAN]
Figure 3-5
IP Configuration: Select DHCP or Static according to your network environment.
MAC Address: Displays the MAC Address of the GV-SNVR.
To enable the PPPoE connection, select PPPoE and fill out the required settings below.
Primary DNS: Type a primary DNS. The default is 192.168.100.1.
Second DNS: Type a second DNS. The default is 192.168.100.2.
PPPoE Username: Type the username you have registered for PPPoE.
PPPoE Password: Type the password you have registered for PPPoE.
Note: The WAN configuration is only available for GV-SNVR1600.
IMPORTANT: When the LAN and WAN are applied simultaneously, note the following:
Only the WAN can be connected to the Internet.
Only the IP Cameras under the same LAN can be searched by the GV-SNVR1600. To
connect with the IP cameras under the WAN, you must add the cameras manually. For
details, see 2.3.2 Manually Connecting GV-IP Camera.