User`s manual
Table Of Contents
- Copyright
- Contents
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 System Configuration
- Chapter 4 Video Playback
- Chapter 5 Remote Access to the GV-SNVR
- Chapter 6 Advanced Applications
- Specifications
- Appendix
Remote Access to the GV-SNVR
6
51
Chapter 6 Advanced Applications
6.1 Upgrading System Firmware
GeoVision periodically release the updated firmware on the Website. You can upgrade the
firmware using an USB storage drive of FAT32 format.
To upgrade the firmware, follow the steps below.
1. Download the firmware file to an USB storage drive.
2. Connect the USB drive to the GV-SNVR.
3. On the main screen, click the Setting button
and select System.
4. Click the Advanced Option button and select Firmware Upgrade.
5. Find the firmware file and click Apply. This dialog box appears.
Figure 6-1
6. Click Execute. The system starts upgrading firmware and automatically reboots after
completing the process.
After the system reboot, the main screen will be displayed automatically.
Note: Optionally you can use the GV-IP Device Utility to upgrade system firmware,
especially for multiple GV-SNVR. For details, see the Upgrading System Firmware section
in 6.2 Using the GV-IP Device Utility.