Daim Ntawv Qhia Tus Neeg Siv

7
3 Disk Installation
The illustrations are for reference only. The actual device may vary.
3.1 Preparation
Disconnect power before installation.
3.2 Remove Upper Cover
1. Loosen the screws on the upper cover.
2. Slide the upper cover backward, then lift it up to remove the cover.
3.3 Install Disks
1. Loosen the screws of the mounting plate on the side panels.
2. Turn the upper mounting plate in the shown direction, then remove the plate.
Repeat the steps to remove the lower mounting plate (for 8-HDD devices
only).