User Manual

Target Mini Fixed Rugged Dome

9. Thread the cable(s) under the black cable holder. You can loosen the

screw on the cable holder if needed.

10. Connect the camera to network and power. For details, see 7.4

Connecting the Camera.

11. Secure the camera to the back plate by tightening the three screws as

shown in Step 4.

12. Access the live view. For details, see 26.2 Accessing the Live View.

13. Adjust image clarity using the GV-IP Device Utility program. For details,

see 25.3 Adjusting Image Clarity.

14. Loosen the tile screw and pan screw, adjust the angles based on the

live view as needed, and tighten the screws again.