User Manual

Bullet Camera (Part I)

Second Shaft

You can adjust the camera body up and down by 90, 112.5, 135, 157.5 or

180 degrees by using the gears inside the camera body and the camera

base.

1. Unscrew the tilting lock screw with the torx wrench.

Torx Wrench

Tilting Lock Screw

2. Hold the camera body, and move the camera base to the right to

separate the camera gears.

Camera Body

Camera Gears

Move the Camera

Base to the Right

3. Adjust the angle of camera body to 90, 112.5, 135, 157.5 or 180

degrees. Then move the camera base to the left to combine the gears.

90°

112.5°

180

157.5°

135°

4. Fasten the tilting lock screw.