User Manual
Bullet Camera (Part I)
83
9
9.4.2 Connecting the Power Cable
Use one of the following methods to supply power to the camera. Note that
GV-BL2510-E / 5310-E do not support PoE.
• Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
• Plug the power adaptor to the terminal block as shown below.
1. Insert the black wire of the Bullet Camera to the left pin (+) and the
brown wire to the right pin (-).
2. Connect the DC 12V Power Adapter to the Terminal Block.
DC 12V Power Adaptor
Terminal Block