User Manual

10.4 Connecting the Camera

Power Connection

Use one of the following methods to supply power to the camera. Note that

GV-BL2511-E / 5311-E do not support PoE.

• Use a Power over Ethernet (PoE) adapter to connect the camera to the

network, and the power will be provided at the same time.

• Plug the power adaptor to the terminal block as shown below. For all

models (except GV-BL2511-E / 5311-E), insert the striped wire to the

left pin (+); for GV-BL2511-E / 5311-E, insert the striped wire to the right

pin (-).

All Models except GV-BL2511-E / 5311-E

GV-BL2511-E / 5311-E