User Manual

Vandal Proof IP Dome (Part IV)
18
9 Tilt Screw Loosens the screw to tilt the camera.
10 TV-Out Provides video input (D1 resolution) for a
monitor.
11 Conduit Connector Waterproofs the audio / I/O wires.
12 Cable Gland Waterproofs the Ethernet cable.
13 Zoom Screw Adjusts the zoom of the camera.
14 Focus Screw Adjusts the focus of the camera.
15 Memory Card Slot Inserts a micro SD card
(SD/SDHC/SDXC/UHSI, Class 10) to
store recording data. For details, see 18.3
Installation.
Note: The TV-out function can only be used during installation to adjust
the focus of the camera. To use the TV out function, connect the
supplied black BNC wire to a monitor and select your signal format
(NTSC or PAL) at the TV Out field on the Web interface. The default
signal format is NTSC. For details, see 4.1.1 Video Settings, GV-IPCam
Firmware Manual. The TV-out wire must be removed before you secure
the housing cover.
185