User Manual
Vandal Proof IP Dome (Part IV)
18
18.4 Connecting the Camera
1. Use a standard network cable to connect the camera to your network.
2. Optionally connect a speaker and an external microphone.
3. Optionally connect a monitor using a Video Out wire. Enable this
function by selecting your signal format at the TV Out field on the Web
interface. See 4.1.1 Video Settings, GV-IPCam Firmware Manual.
4. Optionally connect to input / output devices. For details, see 18.5 I/O
Connector.
5. Connect power using one of the following methods:
• Plug the power adapter to power port.
• Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
6. The status LED of the camera will be on.
197